Can be directly connected to the meeting microphone or common wired microphone 12 sets, the left and right channel and the 6.35 inlet for an output input power amplifier, such as the need to simultaneously use multiple sets can be superposition; high bass debugging, debugging each microphone sensitivity, pre total output adjustable function, high depth function of reverberation. Excellent pre amp function guarantee the output audio signal rich, output volume control machine. Modulation of the function of advanced digital reverberation. High and low audio frequency modulation function. Twelve road microphone input socket, and has the superimposition function (microphone exceeds twelve, with two sets of the equipment can be superimposed using). Twelve road microphones separate debug function, and energy of various types, various indicators of the microphone system, ensure the microphone volume of input and output balance. A power amplifier with sound equipment, this equipment can drive multiple branches, and dozens of microphones work single, double channel output, are free to choose, can be equivalent to "tune twelve Road Station" use.
适用范围：一台功放机的音响设备，而需同时使用多套以至数十套麦克风的会议系统，同时使用多支麦克风的会议、舞台、卡拉OK场所。
Scope of application: a power amplifier audio equipment, and the need to simultaneously use multiple sets of even dozens of sets of microphone conference system, at the same time, the use of multi microphone conference, stage, Cara OK sites.
技术参数：输入电压：AC220V/50Hz，话筒连接匹配：非幻象供电话筒，话筒连接方式：12路6.35插座，重量：2KG，规格（长*宽*高）mm：1U机箱 412*175*44，外接输入连接：话筒6.35插嘴，输出连接：线路莲花双声道，功能：话筒单独音量、总音量、高低音调节、混响调节，功率：5W，开关/指示：船型开关、面板电源指示灯，频率响应：10Hz-20KHz，音频输出电平：≥25mV，信噪比：≥78dB，数码混响时间：≤150mt，MIC输入灵敏度：≥5mV，MIC输入阻抗：2KΩ，输入阻抗：2KΩ，电源要求：AC220V 50Hz，出厂配置：成品、音频线、说明书、合格证、保修卡
Technical parameters: input voltage: AC220V/50Hz, microphone connection matching: non phantom powered microphone, microphone connection: 12 road 6.35 socket, weight: 2KG, specification (length * width * height) mm:1U case 412*175*44, external input connection: 6.35 interrupt microphone output connection: lotus flower line, double track, separate functions: microphone volume, total volume, high bass adjustment, reverb, power: 5W, switch / instructions: rocker switch, panel power indicator, frequency response: 10Hz-20KHz, audio output level is not less than 25mV, the signal-to-noise ratio is not less than 78dB, digital reverberation time: less than or equal to 150mt, MIC input sensitivity: more than or equal to 5mV, MIC input impedance: 2K, input impedance: 2K ohm, power requirements: AC220V 50Hz, factory configuration: products, audio line, manual, certification, warranty card |
